Resuming Playback - JVC XV-NP10S Manuel D'instructions

Basic operations
To check the playback status
You can see the current selection number (the title/chapter number
for DVD VIDEO or track number for SVCD/Video CD/Audio CD),
time information (the track or chapter time while stopped, or
elapsed track or chapter time during playback) and the transport
status (stop, playback, pause, etc.) on the TV screen.
Press ON SCREEN.
Example: for DVD VIDEO
Current chapter
Transfer rate
TITLE 33
8.5Mbps
Current title number
Note that pressing ON SCREEN again brings up the menu bar
under the status bar, from which you can access various functions.
See page 21 for details about the menu bar.
To turn off the status bar
Press ON SCREEN repeatedly until the status bar goes off.
To stop playback completely
Press 7 .
Hint
If you press 0 during playback, the player stops playback and
opens the disc tray.
To stop playback temporarily
Press 8 .
To resume playback, press 3/SELECT. (See the following item.)
12
Current transport
status
number
CHAP 33 TOTAL 1:25:58
Current chapter
time
About On-screen guide icons
You may see the following icons displayed over the picture at
the beginning of an operation.
They have the following meanings.
: Playback
: Pause
: Fast playback with the speed indication
/
: Slow-motion playback with the speed indication
/
: A scene recorded from multiple angles (see page 19)
: A scene recorded with multiple audio languages (see
page 19)
: A scene recorded with multiple subtitle languages (see
page 19)
You can change the setting so that the on-screen guide icons
do not appear on the TV screen (see page 30).

Resuming playback

The player can memorize the position on a disc where you
interrupt playback, and resume playback from that position later.
There are three resume modes; ON, OFF and DISC RESUME.
The mode is initially set to ON when you purchased the player.
• You can select the mode using the preference display (see page
30).
When the resume mode is "ON"
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows "RESUME STOP" and
[– – – – RESUME] appears in the display window.
The memory of the interrupted position is not cleared if you turn off
the player.
When you turn off the player after setting the resume function,
simply press 3/SELECT. The player is turned on, and playback
starts from the interrupted position.
Note that the memory is cleared if you open the disc tray.
When the resume mode is "DISC RESUME"
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows "RESUME STOP" and
[– – – – RESUME] appears in the display window.
The memory of the interrupted position is not cleared if you open
the disc tray or turn off the player.
Hint
The player memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
To clear the memory
Press 7 while the disc is stopped.