Argo X3 ECO Serie Notice D'utilisation Et D'installation page 62

5. In auto mode the internal fan operates in auto quiet mode according to the current modes:
cooling, heating and ventilation.
12. LIGHT button
Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon will
appear on the remote control display. When the remote control is off, press and hold the "Mode"
button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.
13. Wi-Fi button
Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon will
appear on the remote control display. When the remote control is off, press and hold the "Mode"
button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.
14. LIGHT button
Press this button to turn off the indoor unit's display light. The
control display. Press this button again to turn on the display light. The
display.
15. HEALTH/SCAVENGING button
The HEALTHY function means that cold plasma kills bacteria, removes odors and releases
negative oxygen ions.
The SCAVENGING or purification function means active external / internal ventilation to exhaust
the air drawn in by the environment and to introduce fresh air.
Press this button once to start the air purification function: the symbol appears on the display.
Press the button a second time to start the purification and sanitizing function at the same time,
symbols and
Press the button for the third time to turn off both functions.
Press the button the fourth time to start the sanitizing function, appears
Press this button again to repeat the operations listed above.
16. TEMP button
Pressing this button will allow you to display the set temperature, the indoor ambient temperature,
or the outdoor ambient temperature on the indoor unit's display. You can cycle through the settings
on the remote control display as shown below:
• When you select
the indoor unit's display.
• When you select
indoor unit's display.
• When you select
the indoor unit's display.
N.B.:
•
It is not possible to display the outdoor ambient temperature on all models. The indoor unit will
receive the
•
The set temperature will appear on the unit's display on start-up, if enabled to do so.
• When you select to display the indoor or outdoor ambient temperature, the indoor unit will
display the corresponding temperature for three to five seconds, after which it will automatically
revert to displaying the set temperature.
V 01/20
appear.
no display
or "no display" with the remote control, the set temperature will appear on
with the remote control, the indoor ambient temperature will appear on the
with the remote control, the outdoor ambient temperature will appear on
signal but will display the set temperature.
icon will disappear from the remote
icon will appear on the
.
62