Argo X3 ECO Serie Notice D'utilisation Et D'installation page 61

The remote control should be positioned near the user when this function is selected. The
remote control should not be placed anywhere high or low temperatures may occur to avoid
inaccurate ambient temperature detection.
Place the remote control near the user when this function is set. Do not place the remote control
near high or low temperature objects to avoid an inaccurate ambient temperature. Position the
remote control where the indoor unit can receive the remote control signal.
10. TIMER ON / TIMER OFF button
SETTING TIMER ON
This function allows you to program the air conditioner to turn on. When you press this button, the
icon will disappear from the display and the word "ON" will flash on the remote control display.
Press " " or " " to adjust the TIMER ON setting.
Press and hold " " or " " for 2 seconds to rapidly change the time until you reach the desired
value. Press TIMER ON to confirm. The word "ON" will stop flashing. The
the display.
CANCELLING TIMER ON
If the TIMER ON function is enabled, press the TIMER ON button to cancel the setting.
SETTING TIMER OFF
This function allows you to program the air conditioner to turn off. When you press this button, the
icon will disappear from the display and the word "OFF" will flash on the remote control display.
Press " " or " " to adjust the TIMER OFF setting. Press and hold " " or " " for 2 seconds to
rapidly change the time until you reach the desired value. Press "TIMER OFF". The word "OFF"
will stop flashing. The
CANCELLING TIMER OFF
If the TIMER OFF function is enabled, press the TIMER OFF button to cancel the setting.
N.B.:
• You can set the TIMER ON and TIMER OFF function in OFF and ON mode.
• Before you set the TIMER ON or TIMER OFF function, set the clock.
• When the TIMER ON or TIMER OFF function is enabled, the air conditioner will turn on or off
according to the set time. Turning the air conditioner ON/OFF will not affect the setting.
11. CLOCK button
Press this button to set the clock. The
" " within 5 seconds to set the clock. Each time you press " " or " ", the clock will increase or
decrease by 1 minute. Press and hold " " or " " for 2 seconds to rapidly change the time. Release
the button when you reach the desired time. Press "CLOCK" to confirm the time. The
stop flashing.
N.B.:
• The time displays in the 24-hour clock format.
• If no adjustment is made for 5 seconds the remote control will exit the setting mode. This also
applies to the TIMER ON/OFF function.
14. QUIET button
1. When the Quiet function is selected, the symbol will appear on the display
2. In cooling mode the internal fan works with 4 steps of speed; 10 minutes later or when the indoor
temperature is 28°C, the internal fan will operate at step 2 or in quiet mode, ie in accordance with
a comparison between the internal temperature of the environment and the set temperature.
3. In heating mode the internal fan operates with step 3 of speed or in quiet mode, ie in accordance
with a comparison between the internal temperature of the room and the set temperature.
4. In the dehumidification and ventilation mode the internal fan operates in quiet mode.
V 01/20
icon will re-appear on the display.
icon will flash on the remote control display. Press " " or
icon will re-appear on
icon will
.
61