Operating Mode "Sleeping Mode; Remote Control; Fragrance Pad (7); Care - Rotel U7711CH Mode D'emploi

Operating mode "Sleeping Mode" (based on the "Nature Mode")
o
After half an hour, the "Sleeping Mode" setting switches to the next lowest "Nature
Mode" setting. If, for example, the fan is switched to level 2 and the "Sleeping mode"
is activated, the "Nature" interval mode of level 2 will run for half an hour and then
switch to level 1 mode.
o
Using the "ON/SPEED" button (B) select the fanning level you want and use the
"SHIFT" button (F) to select the number of fans.
o
Press the "MODE" button (C) until the symbol with the moon lights up.
o
Both operating modes can be deleted by pressing the "MODE" button until neither
of the symbols are illuminated any more or by pressing the "OFF" button (A).
o
You can still programme the Timer in either mode.

• REMOTE CONTROL

o
You can operate the appliance using the remote control in just the same way as you
would using the control panel on the appliance. The markings are the same as
described above.
o
To get the remote control to work, you must first insert the batteries.

• FRAGRANCE PAD (7)

o
Drizzle a little oil or fragrance on the cotton pad that is in the small box in the middle
of the appliance, then the flow of air from the fan will distribute the scent all around
the room.

• CARE

o
Make sure that the appliance is turned off and unplugged before you start any
cleaning work.
o
To clean the fan, simply use a damp, soft cloth and maybe a little mild soap.
o
Do not use any cleaning agents that contain abrasives. Otherwise these could damage
the surface.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
33