Barrier Screen - Valor Madrona MFCS05 Manuel D'installation

Cast Front and Barrier Screen
32. Finish the installation of the engine: fuel bed,
window, perform all checks and adjustments.
33. Install the screen to the back of the cast front with
4 screws. Orient the screen so its tabs are at the
back. When secured, the screen frame touches the
rear of the cast front and its smooth side is visible.
34. Hook the cast front already fitted with the barrier
screen to the engine's top hooks.
8
Tab at
back of
screen
Smooth
frame visible
at the back
Maintenance
WARNING
DO NOT TOUCH THE STOVE WHILE IT
IS HOT! Let the stove cool first before
cleaning it.
Cast iron and stove body
Dust down the surface regularly with a soft brush and
occasionally follow up with a wipe over with a wet cloth.

Barrier screen

Remove the front and barrier screen by unhooking the
front. Dust down using a brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
appliance.
Window and fireplace
See the Owner's Information section in the Madrona
MF28 fireplace Owner's Manual for instructions on
cleaning the window and fuel bed.
WARNING
FOR SAFETY PURPOSE, ensure the barrier
screen is always on the stove front after
maintenance if it has been removed.