Display Of Programmes And Battery Parameters - VOLTCRAFT CHARGE MANAGER 410 Mode D'emploi

13. DISPLAY OF PROGRAMMES
AND BATTERY PARAMETERS
Total overview:
S1 S2 S3
CHA --- --- ---
Here a display shows all the inserted batteries with their associated programme and
charging condition (battery symbol).
"S1" to "S4" represent the four charge slots. The alignment on the display corresponds to
that of the slots of the charger. The "- - -" lines mean that no battery is inserted in these
slots.
If the charging status of the battery was not yet established, a question mark ("?") appears.
If the battery is being processed, the battery symbol or an arrow are displayed
alternatingly. During charging, the arrow points up; during discharging, it points down.
Detailed view:
Use the two selection buttons "<" or ">" to request details of all available battery data.
Briefly press the button "OK" to return to the total overview.
SLOT1C= 32.6mAh
CHA D= 0.0mAh
The first line contains the charge slot number ("SLOT") and the charge capacity (C). In the
second line, the battery symbol (" ") shows the approximate charge status and the charge
programme (e.g. "CHA" for "CHARGE"). The current discharge capacity (D) is also
displayed.
If charging is in progress, an arrow flashes in front of "C"; if discharging is in progress, an
arrow flashes in front of "D".
S4
47