Programme Cancellation - VOLTCRAFT CHARGE MANAGER 410 Mode D'emploi

Start more cells
If a programme was started already, the display shows the following:
SET PROG. SLOTx
- SAME AS SLOTy
This means that this battery ("x") without input is processed with the same parameters
(programme and current) as the battery inserted before ("y").
If several batteries of the same programme are processed, it is sufficient to select the
parameters for the first battery detected. After a waiting time of 5 seconds each, these
values are automatically accepted without any button pressed.
Use the arrow buttons to select another programme.
At power outage or when the voltage supply is interrupted, both the determined
values and the programme selection are lost.
When the voltage is re-established, the charger automatically starts the programme
"CHA" ("CHARGE") at the smallest charge current (500 mA).
c) Programme Cancellation
A running programme can only be interrupted by removing the battery from the battery slot.
46