Cam Set - Eneo VKC-1340/IR Mode D'emploi

All manuals and user guides at all-guides.com

5.1 CAM SET

Press the MENU button to access the „CAM SET" mode.
• CAM ID
Select the camera ID. The changed CAM ID is saved and applied after EXIT the CAM SET MENU.
• BPS
Set the communication speed to 2400, 4800, 9600, or 19200bps for RS-485 communication. The changed Baud
Rate is saved after BPS SAVE is selected, and the saved Baud Rate is applied after EXIT the CAM SET MENU.
• TITLE
Select the camera TITLE that may be composed of letters, numbers, special texts, or a combination of these up to
22 digits.
: Move to the left
: Move to the right
< : Erase the left character
> : Erase the right character
S : Save title
E : End
• DISPLAY
ON: Display both CAM ID and TITLE in the monitor.
OFF: Disappear both CAM ID and TITLE in the monitor.
• BPS SAVE
The changed Baud Rate is saved.
• EXIT
Return to MAIN MENU
<CAM SET MENU>
CAM ID 1 ~ 255
BPS
9600
TITLE
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( ) :
; . –
DISPLAY
ON/OFF
BPS SAVE
EXIT
Fig. 2: CAM ID table
29
! ) - ,
< > S E