Restoring Factory Settings (Normset) - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

Restoring factory settings
(Normset)
You can restore the original factory settings
of the device.
u Press the MENU/OK button ;.
u
Press the or
edly until "NORMSET" appears on the
display.
u Press the MENU/OK button ; repeat-
edly until "NORM ON" appears on the
display.
The device switches off and immediately
on again. All settings are returned to the
factory settings.
Note:
If you do not press and hold the MENU/
OK button ; long enough, "NORM
OFF" appears on the display. In this
case, your individual settings remain
intact and the device remains switched
on. You can exit the menu with the
ESC/DIS button 5.
All manuals and user guides at all-guides.com
button < repeat-
Factory settings:
Power-on volume
(ON VOL)
Volume of muting
(MUTE LEVEL)
Volume of telephone/
navigation announce-
ment (TEL VOL)
Seek tuning sensitivity
(SENS)
Scan time (SCAN TIME)
Time display (CLOCK)
Time (CLOCK SET)
Time display mode
(CLOCK MODE)
Confi rmation beep
(BEEP)
Display brightness
Factory settings
LAST VOL
0
10
HI
10
OFF
12:00
12H
ON
DIM DAY 15,
DIM NIGHT
12
35