Switching To Mp3 Mode - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

Masquer les pouces Voir aussi pour Kingston MP47:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Preparing a USB data carrier
For the device to recognise a USB data car-
rier, it must be specifi ed as mass storage
device and formatted using the FAT16 or
FAT32 fi le system and contain MP3 or WMA
fi les.
You can created up to 1,500 fi les on a USB
data carrier (directories and tracks). The
directories and tracks can be selected in-
dividually with this device. If you use fi le
names with more than 24 characters (in-
cluding ".MP3" or ".WMA"), this maximum
number of fi les is reduced.
Blaupunkt cannot guarantee the proper
functioning of all USB data carriers avail-
able on the market.
MP3 ID3 tags
MP3 tracks can contain additional infor-
mation such as the artist, album and track
name (ID3 tags). This device can display
ID3 tags of version 1 and 2.

Switching to MP3 mode

Activating the MP3 mode of CD
For an MP3 CD, the MP3 mode is activated
in the same way as the normal CD mode.
For further details, please read the section
entitled "Switching to CD mode" in the "CD
mode" chapter.
Connect USB data carrier and start MP3
mode
To be able to connect a USB data carrier
(e.g. a USB stick or USB hard disk), the
supplied USB cable must be connected to
the rear side of the device as described in
the installation instructions. This cable can
All manuals and user guides at all-guides.com
be routed, for example, to the glove com-
partment or a suitable place of the center
console.
u
As soon as a USB data carrier is connected,
it can be selected with the SOURCE button
=. The display shows "USB".
Confi guring the display
You can display various types of informa-
tion on the current track:
To switch between the different display op-
tions,
u
Note
Always switch off the device before
connecting or disconnecting the USB
data carrier so that the data carrier is
correctly registered and unregistered.
Connect the USB data carrier with the
USB cable.
File name
Name of the artist
Name of the album
Playing time
Time
press the ESC/DIS button 5 once or
several times until the desired display
appears.
Notes:
Artist and album name are a compo-
nent of the MP3 ID3 tag of version
1 and version 2 and can only be dis-
played if they were stored with the
MP3 fi les. For further details, please
read the instructions of your PC MP3
software or burner software.
MP3/WMA mode
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7 647 623 310

Table des Matières