5. Remove the car seat headrest if it stops you from adjusting the
headrest of the Maxi-Cosi RodiFix to the desired height.
6. Make sure to replace the headrest of the back seat of your vehicle
when you remove the car seat Maxi-Cosi RodiFix.
7. The Maxi-Cosi RodiFix back support cannot be removed to ensure
optimum safety.
8. Make sure that fold-down rear seats are locked into position and
that the back rest of the car seat is upright position.
9. Prevent the Maxi-Cosi RodiFix from becoming trapped or weighed
down by luggage, seats and/or slamming doors.
10. Make sure all luggage and other loose objects are secured.
11. Always cover the Maxi-Cosi RodiFix when exposed to direct
sunlight in the car, otherwise, the cover may discolour and plastic
parts may become too hot for your child's skin.
12. The rigid parts and the plastic sections of a child restraint device
should be positioned and installed in such a way that they cannot,
under normal conditions of use of the vehicle, become trapped
under a moving seat or in the vehicle door.
13. Do not use the child restraint device without the cover. Do not
replace the seat cover with a cover other than that recommended
by the manufacturer, because it will have a direct effect on the
functioning of the child restraint.
Warning:
The Maxi-Cosi RodiFix must only be installed in the car in a
forward-facing position.
Environment
Keep all plastic packaging materials out of reach of your child to avoid
the risk of suffocation.
For environmental reasons, when you have stopped using this product,
we ask that you dispose of the product in the proper waste facilities in
accordance with local legislation.
Questions
If you have any questions, contact your local Maxi-Cosi retailer (see
www.maxi-cosi.com for contact information). Make sure that you have
the following information on hand:
-
Serial number on the orange ECE sticker at the bottom of the
Maxi-Cosi RodiFix base;
-
Car make and model and seat on which the Maxi-Cosi RodiFix is
used;
-
Age, height and weight of your child.
19
EN