Never wrap the cable around the clipper. Keep the cable away
X
from hot underlays and objects. Keep the clipper away from
moisture. This can cause a short circuit.
Never clip wet animals.Just clean the machine dryly with a brush
X
and the cleaning brush.
Generally, never plunge the clipper and clipperhead into liquids
X
such as water, soapy water, diesel, petrol, etc. This may cause
serious injury to mechanics and motor.
Do not switch-on the clipper or the charging station if you sus-
X
pect liquid to be penetrated. Hand it over to a service centre.
Before commencing any maintenance work disconnect the elec-
X
trical power supply by pulling out the plug. Even with the machine
switched off, do not handle the area round the clipper blades as
long as the machine is still connected to a power source. Whene-
ver working on the clipper blades/clipperhead, always first dis-
connect the power supply.
1.6
Animals
WARNING!
The noise of the clipper can trouble animals. A kick, an attack or the
weight of the animal can cause serious injuries. Therefore:
Just persons being experienced in handling with animals are al-
X
lowed to clip the animals.
Fix and calm the animal sufficiently before clipping.
X
Work carefully.
X
Unauthorised persons are not permitted to approach the clipping
X
place.
1.7
Battery
Do not charge, place or leave the appliance where it is expected
to be:
y subject to damage by an animal, or
y exposed to weather
Plug charger directly into receptacle – do not use an extension
X
cord.
Unplug charger before plugging or unplugging appliance.
X
For an appliance or DETACHABLE SUPPLY UNIT with pins for in-
sertion into the socket-outlet:
Plug charger directly into receptacle – do not use an extension
X
cord.
Unplug charger before plugging or unplugging appliance.
X
Translation of the original instructions / Small animal clipper
5