IKA LR 1000 basic Mode D'emploi page 49

Now you can remove the anchor stirrer as shown in Fig. 25.
All O-rings can now be carefully removed by hand or using a
blunt tool for cleaning too.
• Wear protective gloves during cleaning the instrument.
• Electrical devices may not be placed in the cleaning
agent for the purpose of cleaning.
• Do not allow moisture to get into the equipment when
cleaning.
• Please consult IKA before using any cleaning or decon-
tamination methods, other than those recommended
here.
• The handles cannot be place in the cleaning agent for
cleaning.
• The only cleaners or disinfectants that may be used are
those that:
- lie in the pH range 5 - 8,
- contain no corrosive alkalis, peroxides, chlorine com-
pounds, acids or brine.
• All product contacting components are suited for
cleaning in the laboratory dish washers.
All manuals and user guides at all-guides.com
Only clean IKA appliances using these IKA approved clean-
ing agents.
Spare parts order:
Fig. 25
When ordering spare parts, please give:
•
•
•
Repair:
Please send equipment for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repairing, please request the "Decontamination Cer-
tificate" from IKA, or download the printout of it from the
IKA website www.ika.com.
If you require servicing, return the equipment in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.
Dirt Cleaning agent
Dyes Isopropanol
Building materials Water containing detergent, Isopropanol
Cosmetics Water containing detergent, Isopropanol
Food Water containing detergent
Fuels Water containing detergent
Other materials Please consult IKA
machine type
serial number, see type plate
item number and designation of the spare part see
www.ika.com, spare parts diagram and spare parts list.
49