Pilot Tone Code Setting - weewell WMA235 Mode D'emploi

Pilot tone code setting:

• Push the "SETTING" button two times, the "PT" icon flashes, then push the
"CHANNEL" button to change the Pilot tone.
Operation Frequency list:
Channel
IMPORTANT! Test sound reception before using wherever location of
transmitter is changed. (Refer to Testing Before First Time Usage)
1. Separate the Transmitter and the receiver at least 1 to 2 meters (3 to 6.5
feet) to start normal setting to avoid whistling sound from the receiver.
2. Place transmitter in the same room with child. Point microphone directly
toward child location, such as crib of playing area.
3. Set both Receiver and Transmitter to the same channel and pilot tone,
otherwise your monitors will not work properly.
4. Adjust transmitter SENSITIVITY switch to a desired position.
5. The receiver will go to energy saving mode when it doesn't detect sound
from the surrounding area.
6. Place receiver where you stay and hear it.
7. Set the receiver to the same channel with the transmitter by "right
Channel" key and "left Channel" key.
8. Rotate VOLUME knob to adjust volume.
9. Turning off by slide the OFF/ON switch to "OFF" position.
I
8
WMA235-236 USER MANUAL
All manuals and user guides at all-guides.com
MHZ
CH1 863.3
CH2 863.4
CH3 863.5
CH4 863.6
CH5 863.7
CH6 863.8
CH7 863.9
CH8 864
CH9 864.1
CH10 864.2
CH11 864.3
CH12 864.4
CH13 864.5
CH14 864.6
CH15 864.7
CH16 864.8
Pilot tone code:
pilot tone HZ
PT1 65
PT2 69
PT3 73
PT4 77
PT5 81
PT6 85
PT7 90
PT8 96
PT9 102
PT10 108
PT11 114
PT12 120
PT13 126
PT14 132
PT15 138
PT16 144