Operation - Beyerdynamic Headzone Home Notice D'utilisation

6.

Operation

Turning on
• When the HBC 1 base station is connected, turn it on via the standby button
appropriate LED will illuminate green.
Important: If you would like to disconnect the HBC 1 base station, turn it off via the standby
button first. The appropriate LED will illuminate red.
Volume control
• Press the multifunction control
"Control" LED will illuminate. Turn the multifunction control
In the "Volume" menu you can set the volume of the Headzone
Important: When connecting the headphone please ensure that the volume is turned down to
minimum (i.e. turn the multifunction control 6 to the very left). Adjust the volume after
putting on the headphone.
Note: If overload occurs and distortions are audible (e.g. when the input signals are set to a
high gain and the volume is also set very high), reduce the volume via the "Volume" menu
until the distortions are eliminated.
How to display the audio format
• The fed in surround format of the connected audio source is displayed via the illuminated
appropriate "Input Format" LED
The audio formats which are recognised and reproduced by Headzone
Dolby Digital und Dolby Pro Logic as well as the standard 2-channel format PCM stereo (e.g. CDs).
Configuration menu item / parameter
• Press the multifunction control
adjust. The appropriate "Control" LED
• Turn the multifunction control
changed adjustment of the selected parameter is indicated by the "Value" LEDs
• The parameters can be set in 33 steps; i.e. with every third value the display of the "Value"
LEDs moves one LED further. The very left LED identifies the lowest possible setting, the very
right LED the highest possible setting.
Note: After the configuration of the parameters "Room Size", "Ambience" or "Headtracker"
the HBC 1 base station will automatically return to the menu item "Volume" after a few
seconds. Therefore, the multifunction control
to set the headphone volume in normal operation.
Important: All "Volume", "Room Size" and "Ambience" settings are stored in the HBC 1 base
station.
• In addition to the "Volume" parameter (refer to the paragraph "Voume control"), you can
select / adjust the following menu items / parameters:
– Room Size
With the "Room Size" parameter you can adjust the size of the virtual room / living room
and the distance to the virtual speakers, i.e. you decide how strong a small or large room
will change the sonic impression of audio material reproduced by loudspeakers. This will
to select the "Volume" parameter. The appropriate
.
to select the menu item / parameter you would like to
will illuminate.
to the right or left to adjust the selected parameter. The
always has the function of a volume control
- 37 -
. The
to adjust the volume.
Home system.
®
® Home include DTS
.
® ,