Hr 1 Head Tracking Receiver And Hc 1 Mounting Clip - Beyerdynamic Headzone Home Notice D'utilisation

OPERATING INSTRUCTIONS - ENGLISH
9.

HR 1 head tracking receiver and HC 1 mounting clip

(only Headzone
• As a counterpart to the ultrasonic transmitters of the
head tracker of the DT 880 HT, the HR 1 head tracking
receiver contains the ultrasonic receivers.
• Slide the plastic rail of the HR 1 onto the aluminium
hinge.
Mounting
• The HC 1 mounting clip allows versatile positioning of
HR 1 head tracking receiver, e.g. placing on flat surfaces,
TFT screens or wall mounting.
• It is also possible to feed the connecting cable of the
HR 1 head tracking receiver through the opening in
the HC 1 clip:
– Remove the knurled screw.
– Separate the HC 1 clip into its two plastic parts.
– Feed the cable through and reassemble the parts in
reverse order.
® Home version WITH head tracker)
HC1
Placing on flat surfaces or tube screens
- 42 -
HR 1
Mounting onto TFT screens
HC1
HR 1
Wall mounting
HR 1
HC1