Beyerdynamic Headzone Home Notice D'utilisation page 39

• Headzone ® Home version WITHOUT head tracker:
In order to ensure a proper function, the Headtracker On/Off switch
"Off" position permanently.
How to select the bypass mode
• If you would like to use the HBC 1 base station as a stereo headphone amplifier (bypass mode),
press the bypass button
Note: Although the surround processing is completely deactivated in the bypass mode, the
reproduced volume is still influenced by the "Room Size" and "Ambience" parameters,
because the volume could suddenly increase too much and damage your hearing when
switching between the "Processing" and "Bypass" mode. As the reproduced volume is linked
to the "Room Size" and "Ambience" parameters, the volume of the "Bypass" or "Processing"
mode is adapted accordingly.
• If the HBC 1 base station is to operate in the Headzone
button . The appropriate LED will not illuminate.
. The appropriate LED will illuminate blue.
- 39 -
MUST remain in the
mode, you need not press the bypass
®