Lenze EMF2181IB Instructions De Montage page 60

All manuals and user guides at all-guides.com
6 Electrical installation
Communication via the diagnostic interface (Servo Drives 9400)
Installation steps
Step Description
1. Connect the diagnostic interface to the Servo Drives
9400 (use prefabricated cable)
2. If it is not possible to use the internal modem, connect
an external modem.
3. Connect the controller to the CAN bus.
4. Connect the ModemCAN 2181 to the telephone network.
5. Connect the voltage supply to the plug connector.
50

Connection Additional
information
(see graphic)
 56
 59
 -
 57
 60
EDKMF2181 DE/EN/FR/ES/IT 3.0