Memory Card; Installation - Stealth Cam STC-DS4KMAX Mode D'emploi

To insert the SD memory card into the camera: first locate the
SD card slot on the right hand side of the of the camera case.
Next with the SD card label facing towards the front of the
camera, insert the SD card.
When the card has been pressed in fully there will be a
noticeable resistance as the spring locking mechanism activates
to hold on the SD card.
No force should be required to insert the card, should it feel as
though the card will not freely slide into the slot, remove
the card and check for any obstructions.
QHD Video Recording require a minimum SD Card requirement of
a read/write data rate of 50k bits per second. Recommended SD
Video Class of V6 or above.
4K Video Recording requires minimum SD Card requirements of a
read/write data rate of 60k bits per second. Recommended SD
Video class V10 or above.
Image Capacity – varies based upon photo/video resolution and SD Card storage size.
For more information please visit www.stealthcam.com
www.stealthcam.com
877-­‐269-­‐8490
MEMORY CARD
INSTALLATION
21
Page