Stealth Cam STC-DS4KMAX Mode D'emploi page 18

LATITUDE – 000.000000N (default): This setting is used for the GEO-TAG of the camera. It will
!
not be displayed on the images directly, but rather on the background image
information. The coordinates can be changed from 000.000000 to 179.999999 and either N
(North) or S (South). With this option blinking, use the UP or DOWN arrow buttons to
change the initial number blinking. Once the number is correct use the RIGHT arrow button to
continue to the next value. Repeat until the final desired numeric sequence is entered.
LONGITUDE – 000.000000E (default): This setting is used for the GEO-TAG of the camera. It will
!
not be displayed on the images directly, but rather on the background image
information. The coordinates can be changed from 000.000000 to 179.999999 and either E (East)
or W (West). With this option blinking, use the UP or DOWN arrow buttons to change the initial
number blinking. Once the number is correct use the RIGHT arrow button to continue to the
next value. Repeat until the final desired numeric sequence is entered.
FACTORY RESET – NO (default): This setting is used to reset the camera to its factory
!
defaults. With this option blinking, pressing the UP or DOWN arrow buttons will cause the camera
to cycle between the two options of NO or YES. When the YES option is chosen and the ENTER
button is press the camera will default all configurations made up to this point.
! SECURITY KEY – OFF (default): This setting allows the owner of the camera to program a four
(4) character alphanumeric code to keep unauthorized people from accessing their camera
settings. To turn this feature on press the ENTER button, then press the UP or DOWN arrow
buttons to change to the YES option. Once chosen, press the ENTER button and the camera will
now engage this feature. Pressing the DOWN arrow key will move to the security key configuration.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
18
Page