Stealth Cam STC-DS4KMAX Mode D'emploi page 12

REDUCE BLUR – ADVANCED (default): This setting is used to determine if the camera should use the
"
MATRIX Blur reduction technology to dramatically reduce the blur effect resulting in clearer night time
infrared shots. (STANDARD) Minimizes blurring effect in images while retaining long---range night
image capability. (ADVANCED) Greatly enhances blur reduction achieved through a faster shutter
speed. This setting my cause a slight reduction in night time range and increased grain in the image.
(PROGRESSIVE) Maximizes the blur reduction with the fastest shutter speed. This setting may have
darker images with more defined subject detail. With this option blinking, pressing the UP or DOWN
arrow buttons will cause the camera to cycle between the options of STANDARD, ADVANCED, or
PROGRESSIVE.
PHOTO BURST – 1 PHOTO (default): This setting is used to determine the number of photos
"
the camera will take during its activation. This setting can be changed between 1 PHOTO up
to 9 PHOTOS. With this option blinking, use the UP or DOWN arrow key to move between the
value range in increments of 1.
INTERVAL - 1 Second (default) : This setting is used to set the time delay between shots in a single
"
series of burst images. This setting can be changed between 1 Second up to 5 Seconds. With the option
blinking, use the UP or DOWN arrow key to move between the value range in increments of 1. Press the
ENTER button to accept all your changes. NOTE - This setting is only visible when Photo Burst is set
between 2-9 photos.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING - CUSTOM (CONT)
12
Page