Adjusting The Grinding Unit - Siemens TE506 RW Serie Mode D'emploi

de en
You can set the following:
Shut off
: Here you can set the time
span after which the appliance automati-
cally switches off following the last drink
preparation. A time between 15 minutes
and 4 hours can be set. The default time is
1 hour, but this can be shortened to save
energy.
Filter
: Here you can set whether a water
ilter is being used. If a water ilter is not be-
ing used, turn the setting to
water ilter is being used, turn the setting to
Activate filter
be rinsed before use (see "Water ilter" on
page 11).
Start Calc'n'Clean
Calc'n'Clean
grammes (
cleaning
) can be selected manually here.
Press the start button (10) and run the
selected programme (see "Service Pro-
grammes" on page 17).
Temp.
: The brewing temperature (
middle low
/ ) can be set here.
Language
: The display language can be
set here.
Water hardness
setting can be adjusted on this appliance.
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briely in water, gently
shake off any drips, and check the result
after one minute.
12
TE_506_509_1RW.indb 12
All manuals and user guides at all-guides.com
No / Old
. If a
. New water ilters have to
: The service pro-
descaling
/
high
: The water hardness
Level
German (°dH)
1 1-7
2 8-14
3 15-21
4 22-30
Drink counter
drinks have been dispensed since the appli-
ance was irst put into operation.
Adjusting the grinding
unit
The rotary selector (3) adjusts the grind set-
tings from coarse to ine.
/ Warning!
¡
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
/ the rotary selector (3) from ine (a: Turn
anticlockwise) to coarse (b: Turn clock-
wise) as required.
a
Note: The new setting will not become ap-
parent until after the second cup of coffee.
Tip: For dark roast coffee beans, choose a
iner grind, for lighter beans a coarser grind.
Water hardness
French (°fH)
1-13
14-25
26-38
39-54
: This displays how many
b
24.01.2013 15:55:20