Häfele dialock DT 100 Instructions De Service Et De Montage page 56

Disassembly
Tools required:
1. Undo the setscrews of the door levers
2. Remove the door levers.
3. Press the upper part of the cover against the door to remove the load
from the magnets of the bracket.
4. Use the release lever tool to remove the covers of the inside and out-
side modules.
5. Remove the batteries from the battery compartment.
6. Loosen the clamping plate screws at the top of the mounting plates
(inside and outside).
7. Loosen the 5 countersink screws of the battery mounting and remove
the battery mounting from the mounting plate.
8. Loosen the 4 mounting screws of the inside module mounting plate.
9. Remove the outside module and the mounting plate of the inside
module from the door.
Disassembly of the DT 100 has been completed.
56 DT 100 - Status: 08.2011 - 732.29.137
All manuals and user guides at all-guides.com
Mounting and Operating Instructions