Häfele dialock DT 100 Instructions De Service Et De Montage page 39

Mounting
Requirements:
Depending on the design of the mounting plate, it also possible to use mortise
locks on the DT 100 that deviate from the DIN norm (e.g. for Austria).
The length of the following DT 100 components depends on the thickness
of the door and must therefore be selected appropriately:
Tools required and auxiliary mounting materials:
- Ø = 8 mm
- Ø = 16 mm (drilled hole for the connection cable)
All manuals and user guides at all-guides.com
DT 100 - Status: 087.2011 - 732.29.137
Mounting and Operating Instructions
39