Additional Informations - Ecotop Scale Serie Mode D'emploi

THANK YOU for your purchase of the RC semi-scale sailplane Ka-8b!
We made a main effort while drawing and building this sailplane so that it is the best model you ever built and fly. We provide you a kit
with the highest quality and the best possible performances.
We wish you a great success while assembling and flying your new Ka-8b.
You were already numerous to appreciate our 1:5 scale Ka-8b, with a 3 meters wingspan. Thus, we decided to offer the same sailplane
with 1:4 scale, which increase the span to 3.75 meters. But when you see the new volume of the fuse, it is a model really much more
imposing! Every qualities of his "little brother" are found obviously, and even are still improved, because more a model is large, better
is the output! It can obviously receive our exclusive motor system with an easy to remove propeller which does not affect the shape
of the nose with a spinner. With this power system, you can fly without tug plane, and hand launch the sailplane alone, without fear.
Ka-8b key features
The whole body and wings are made with balsa and plywood, so the sailplane is light, but strong.
●
The Ka-8b is covered with Oratex®, for a realistic aspect.
●
The powerful motor make possible to fly without a tug plane and makes it safe to fly at slope. Climb rate: > 5 m/s !
●
Electric spoilers make landing very easy on short runways.
●
And of course... the model is delivered fully assembled and covered, you just have to make final assembly, install the radio system
●
and the motor.
With the Ka-8b, you can practice soaring on flat fields as well as for slope soaring. You have with this sailplane a realistic semi-scale
model in flight, which can be accessed to modellers used to manage turns with rudder and ailerons.

Additional informations:

The optional motor is fitted with a long shaft, and the propeller can be removed in less than one minute! You can change from
●
"Electric Sailplane" to "Pure Sailplane" according to your mood.
The big rudder make easy to fly with the "old sailplanes" style.
●
The 4S 5000 mAh Lipo battery allow very long flight time.
●
The GOE 533 airfoil have a great lift, and with the low weight, the flying speed is very realistic.
●
IMPORTANT:
Please take a few moments to read this instruction manual before beginning assembly. Do an inventory of the parts using the parts
list, to control that there is no lack or imperfection.
Thank you to contact TOPMODEL immediately, if you note a missing part or a damaged part.
WARRANTY:
It is important to notify to TOPMODEL all damage or problems with this model within 7 days following the reception of the kit to be able
to benefit the warranty. In the event of return of the model, the customer is responsible for transport and return shipping cost is at his
expenses. In the event of defect, the part will be exchanged or replaced once this one will be delivered to TOPMODEL for expertise
(transport on your cost). In the event of problem, do not hesitate to contact TOPMODEL.
TOPMODEL cannot control the dexterity of the modeller and cannot influence the builder during the assembly or the use of this radio-
controlled model, thus TOPMODEL will in no way accept or assume responsibility or liability for damages resulting from the use of this
user assembled product.
The purchaser/user accepts all the responsibilities in the event of structural or
To assemble this kit, you'll need the items listed below:
● ADHESIVE :
Cyanoacrylate thin and thick, epoxy 30' and 5' adhesives.
● TOOLS :
Knife (X-acto), Phillips screw driver (small and medium), needle tip pliers, pliers, scissors, scotch tape, masking tape, double
sticking tape, drill (bits all size set), sanding paper, ruler, ball point pen, clips, alcohol, soldering iron, piece of cloth or rags, etc.
REMINDER
We take great care to delivering the best possible quality.
We kindly remind you that these models are not ready to fly and that the remaining work is an important part to get the
model flying. For this, please, check all glue joints and assemblies.
Safety first !
We thank you for your attention during the assembly of our kits, and wish you good and numerous flights !
mechanical problems.
TO ASSEMBLE THIS KIT
Notice Ecotop - Page 3 - Ka-8b 1:4
TOPMODEL SAS