Declaration Of Conformity; General Power Tool Safety Warnings; Electrical Safety - WOLFF TURBO-STRIPPER 230 V/ 50 Hz Serie Mode D'emploi

Declaration of Conformity

Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standardiza-
tion documents:
DIN EN 1037, AS/NZ 3820, EN ISO 12100, DIN EN
60204-1, DIN EN 60745-1, AS/NZ 60745, DIN EN 55014-
1, DIN EN 55014-2, according to the provisions of the:
2006/42/EC, 2004/108/EC, 2006/95/EC, Electrical Safety
Act 2002.
Dipl.-Ing. (FH) Dieter Hammel Authorised to issue
this declaration and for the gathering of
the technical documentation.
08.02.2018 i.V.
WOLFF GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply................................230V/115V/100V AC
Frequency......................................................50 Hz
Power consumption ................. .2600W/2200W/1400W
Stroke rate............................................5 000 slag/min
Weight total..............................................ca. 140 kg
Weight hood............................................. ..........40kg
Additional weight ................................................30kg
Blade's width............................................... 350 mm
Speed......................................................13,5 m/min
Includes:
1 TURBO-STRIPPER
1 Blade 350x60x1 mm
1 Blade 350x60x1,5 mm
1 U-shape blade, bottom cutting edge
1 U-shape blade, top cutting edge
1 Blade cover
1 Tool pouch
1 Hearing protection
1 Protecting gloves
1 emergency operating piece
1 Screwdriver SW 6
1 Fork wrench SW17
1 Doubel Fork Wrench SW 13/17
1 Allen key SW 2
1 Allen key SW 2,5
1 Allen key SW 4
1 Allen key SW 5
1 Allen key SW 8
1 Manual
1 Spare parts List
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
All manuals and user guides at all-guides.com
2.0 Safety Warnings

2.1 General Power Tool Safety Warnings

Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmosphe-
c) Keep children and bystanders away while opera-

2) Electrical safety

a) Power tool plugs must match the outlet. Never
b) Avoid body contact with earthed or grounded sur-
c) Do not expose power tools to rain or wet conditi-
www.wolff -tools.de
Attention Read all safety warnings and all
instructions.
Cluttered or dark areas invite accidents.
res, such as in the presence of fl ammable liquids,
gases or dust.
Power tools create sparks which may ignite the Dust
or fumes.
ting a power tool.
Distractions can cause you to lose control.
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
faces, such as pipes, radiators, ranges and refrige-
rators.
There is an increased risk of electric shock if your
body is earthed or grounded.
ons.
EN
15