Babyauto Enbata LB517 Notice D'instruction page 20

2. SEAT PARTS AND FITTINGS
A. Headrest.
B. Harness strap slot.
C. Ergo seat cushion Group 1
D. Harness straps.
E. Harness pads.
F. Locking buckle.
G. Harness adjustment button.
H. Buckle pad.
I. Harness adjuster strap.
J. Abdominal belt hook.
K. Boosters height adjuster lever (15-36 Kg.).
L. Harness adjuster strap.
M.Vertical belt hook.
N. Harness pad connector.
O. Harness straps.
P. Belt hook Group 1
Q. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 1.
WARNING
1. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (3.1).
2. Slip the belt through the
pass the belt once more through the next
safety belt to the vehicle anchor point. You will hear a "click" when
properly fastened (3.2, 3.3 y 3.4).
3. Check that the seat belt is not twisted or tangled, that the lap belt
passes under the armrests and that the diagonal shoulder belt
passes over the headrest before proceeding then slip the diagonal
belt through the
4. Place your knee on the seat of the child seat and hold the diagonal
shoulder belt. Pull it upwards to tighten it as much as possible
20 Child restraint system
All manuals and user guides at all-guides.com
Only suitable for Group 1, approx. 9
months to 4 years of age (9-18 Kg.)
P guides in the plastic backrest then
M guides (3.5, 3.6 y 3.7)
P guide and fasten the
ENBATA