Bassinet Assembly - UPPAbaby VISTSA Mode D'emploi

Step 1 : Unfold the Bassinet
1a) Lift the sides of the bassinet and
push both steel braces firmly into
their respective sockets.
Make sure that both braces are properly
locked in place.

BASSINET ASSEMBLY

2a) Place the liner in the bassinet. Pull one
end of the liner over the bottom of the
bassinet, then stretch the liner evenly
over the sides.
Fasten the liner to the sides with the
Velcro strips.
UPPAbaby VISTA Instruction Manual
Step 2 : Install liner
7