UPPAbaby VISTSA Mode D'emploi page 7

Step 2 cont'd.
2b) To insert the front wheels: slide each
front wheel into the shaft until it locks.
To remove the front wheels: turn the
plastic knob in the direction shown
and slide wheel off.
3a) To attach seat: lower the seat onto the
frame and press down until it clicks into
place. Pull up on seat to be sure it is
locked to the frame.
CLICK
3b) To remove seat: (arrow 1) push down
both security buttons and (arrow 2) lift
the seat from the frame.
NOTE: Seat can attach in either forward or
rear-facing directions.
UPPAbaby VISTA Instruction Manual
Step 3 : Attach the seat
1
2
1
2
CLICK
1
2
1
2
5