Technical Information; Environment Concerns - Zanussi ZDF3023 Notice D'utilisation

3. Release Start when the display shows the
setting of the water softener.
4. Turn the programme knob counterclockwise
until the programme marker is aligned with
the second washing programme on the
control panel.
5. The display shows the setting of the rinse
aid dispenser.

Technical information

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot
water supply to decrease energy consumption.

Environment concerns

The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
14
All manuals and user guides at all-guides.com
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
Left-on mode
Off-mode
6. Press Start to change the setting.
7. To confirm the setting, turn the programme
knob until the programme marker is aligned
with the off position.
2)
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
• Discard correctly the packaging material. Re-
cycle the materials with the symbol
Off
On
600 / 850 / 610
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
12
0.99 W
0.1 W
.
www.zanussi.com