Manual Adjustment; Electronic Adjustment - Zanussi ZDF3023 Notice D'utilisation

Manual adjustment

1

Electronic adjustment

The appliance must be in setting mode.
Refer to 'SETTING AND STARTING A
PROGRAMME'.
1. Make sure that the programme marker on
the programme knob is aligned with the off
position.
2. Press and hold Start. At the same time turn
the programme knob counterclockwise until
the programme marker is aligned with the
first programme on the control panel.
3. Release Start when the display shows the
setting of the water softener.
• Example:
= level 5.
4. Press Start again and again to change the
setting.
5. To confirm the setting, turn the programme
knob until the programme marker is aligned
with the off position.
Filling the salt container
Caution! Only use dishwasher salt. Other
products can cause damage to the
appliance.
Water and salt can come out from the salt
container when you fill it. Risk of corrosion. To
prevent it, after you fill the salt container, start a
programme.
www.zanussi.com
All manuals and user guides at all-guides.com
2
Turn the water hard-
ness dial to the posi-
tion 1 or 2.
1
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
5
Filling the rinse aid dispenser
Caution! Only use rinse aid for
dishwashers. Other products can cause
damage to the appliance.
The rinse aid, during the last rinsing phase,
helps to dry the dishes without streaks and
stains.
2
4
6
7