SilverCrest SKF 2300 B2 Mode D'emploi page 76

WARNING - RISK OF BURNS!
► Allow the appliance to cool down completely before cleaning it.
CAUTION - PROPERTY DAMAGE!
► When cleaning the components do not use aggressive or abrasive clean-
ing agents or materials such as scouring milk or steel wool. These could
damage the upper surfaces of the appliance!
To simplify cleaning, completely dismantle the deep fryer:
1) Open the appliance lid as far as possible and then pull it upwards and out
of the hinge supports 2.
2) Remove the covering of the permanent metal fi lter 1 and lift the permanent
metal fi lter e out.
3) Pull the handle upwards until it audibly engages. Remove the frying basket 3.
4) Pull the operating/heating element 5 upwards from the guiding rails.
Place the operating/heating element 5 at a clean and dry location.
5) Take out the stainless steel container 4 and remove the fat or oil.
The frying basket 3 and the stainless steel container 4 can be cleaned in
■
the dishwasher. They are suitable for dishwashers.
■ Clean the housing with a moist cloth. If required, use a mild detergent on the
cloth.
Clean the operating/heating element 5 with a damp cloth and then dry it
■
well.
Clean the permanent metal fi lter e in warm water containing a mild detergent.
■
■ Clean the appliance lid in warm water containing a mild detergent. Rinse the
appliance lid off with clear water.
Dry the appliance lid and then place it upright on its side so that any excess
water still inside of the lid can drain away.
Be aware that the lid MUST be completely dry before re-use!
6) Dry all parts well before reassembly.
7) Reassemble the deep fryer in the reverse order.
SKF 2300 B2
All manuals and user guides at all-guides.com
GB
73