Operation; Connections; Connecting The Suction Hose; Electrical Connection - Nilfisk ALTO ATTIX 8 GALLON Notice D'utilisation

All manuals and user guides at all-guides.com

4 Operation

4.1

Connections

4.1.1 Connecting the suction
hose

4.1.2 Electrical connection

4.1.3 Connecting power
1)
tools
The operating voltage shown on
the rating plate must corres-
pond to the voltage of the
mains power supply.
To comply with regulations, only
approved dust producing tools
should be connected.
5. Fit the suction tube fastener
about 20 cm from the edge
of the lower extension tube
as shown in the figure.
1. Connect the suction hose.
1. Ensure that the cleaner is
switched off.
2. Insert the power cord into a
properly installed and fused
socket with earthing contact.
The maximum power consump-
tion of the connected power tool
is stated in section 9.4 "Techni-
cal data".
1. Ensure that the power tool
is switched off.
2. Connect the power tool to
1)
the appliance socket on the
control panel.
1)
Option depending on model
ATTIX 8 GALLON
ATTIX 8 GALLON AS/E
english
7