Switching On The Vacuum Cleaner; Switch Position "I; Switch Position "Auto; Suction Power Control - Nilfisk ALTO ATTIX 8 GALLON Notice D'utilisation

ATTIX 8 GALLON
ATTIX 8 GALLON AS/E
english 4.2 Switching on the
vacuum cleaner

4.2.1 Switch position "I"

4.2.2 Switch position "auto"

4.2.3 Suction power control

4.3

Acoustic warning

8
All manuals and user guides at all-guides.com
1)
Only ATTIX 8 GALLON AS/E:
The suction hose diameter
must correspond to the suction
hose diameter setting:
Hose Hose diameter
setting
ø
27
ø
32
ø
36
ø
50
ø
1)
1) If the air speed in the suction
hose drops to below 20 m/s, an
acoustic warning is emitted for
1. Turn the switch to position
"I".
The vacuum cleaner motor
starts.
Only ATTIX 8 GALLON AS/E:
The suction hose diameter
must correspond to the suction
hose diameter setting:
Hose
ø
27
ø
32
ø
36
ø
50
ø
CAUTION!
Before switching the switch
to position "auto"
that the power tool con-
nected to the appliance
socket is switched off.
1. Turn the switch to position
"auto".
The vacuum cleaner motor
starts when the connected
power tool is switched on.
2. When the power tool is
switched off, the vacuum
cleaner continues to run for
a short moment so that any
dust in the suction hose is
conveyed to the filter bag.
27
ø
32
ø
36
ø
50
ø
The motor speed and the
suction power can be varied
with the suction power control
This allows precise adaptation
of the suction power for differ-
ent cleaning tasks.
safety reasons. See section 8
"Troubleshooting".
1)
Option depending on model
Hose diameter
setting
27
ø
32
ø
36
ø
50
ø
1) , ensure
1) .