Lindy 38062 Manuel Utilisateur page 3

User Manual
Introduction
Thank you for purchasing the LINDY 16 Port 4K HDMI Splitter. This device is a high
performance UHD 4K2K HDMI amplifier and video & audio splitter which allows one Ultra High
Definition source to be displayed simultaneously on 16 different Ultra High Definition displays.
Package Contents
 16 Port UHD HDMI Splitter
 5V DC 6A PSU
 This manual
Features
 HDMI v1.4, HDCP 1.1 and DVI 1.0 compliant
 Supports HDTV resolutions up to 4K2K@30Hz
 Supports multi-channel audio when using a HDMI source and display(s)
 When used with computers, supports DVI-D resolutions up to UXGA (1920 x 1200)
 LPCM7.1CH, Dolby TrueHD, and DTS-HD Master Audio transmission
 Supports both DVI-D source and display devices when using DVI-D/HDMI adapter
cables
 Each input/output can support up to 15 metres
 xvYCC & 8/12 bit deep colour
 Up to 300MHz bandwidth
 Chassis material: Powder coated metal
 Dimensions: WxDxH - 436 x 120 x 49mm (height with feet)
 Weight: 1.66kg total
 Warranty: 2yrs
Installation
Make sure all devices are switched off before making any connections. Once all the
connections have been made, switch on the devices in this order: displays, HDMI Splitter,
source device.
1. EDID Switch: Choose TV to allow the switch to use the EDID signal from the first
connected device. Choose STD to allow the switch to use the EDID signal recorded in
the switch. The default setting is TV and should only be changed if you are having any
problems with your display
2. USB Port: Service port only
3. HDMI In: Connect your HD source device to this port
4. HDMI Out: Connect up to 16 HD displays to these ports
5. DC 5V: Connect the included 5V DC power supply to this port
All manuals and user guides at all-guides.com
English