Britax Boulevard CS Guide De L'utilisateur page 21

Care and Maintenance
Harness Buckle Removal
1 Recline the child seat.
2 Locate the metal buckle strap retainer on the
bottom of the child seat.
3 Pull the retainer away from the child seat to
loosen.
4 Turn the retainer so the short side will fit
through the slot in the child seat shell (Fig. A).
5 Push the retainer through the slots in the
shell and cover, to the top of the child seat.
Re-threading the Harness Buckle
1 Locate the slot in cover and shell for the harness buckle.
2 Turn the buckle retainer so the short side will fit through the slot in
the cover and the child seat shell (Fig. A).
3 Push the retainer through the slots in the shell and cover, to the
bottom of the child seat.
4 Pull the harness buckle away from the child seat until tight and
verify the strap is not twisted and the release button is facing
outward.
38
All manuals and user guides at all-guides.com
Cleaning the Harness Buckle
If a child eats and drinks while in the child seat,
the harness buckle may need to be periodically
checked and cleaned of any food, drink or other
debris.
•
•
A
•
•
•
REMOVE BUCKLE as described above.
RINSE THOROUGHLY using warm water
(Fig. B).
TEST THE HARNESS BUCKLE by fastening
(Fig. C) and unfastening (Fig. D) until a click
is heard after inserting each buckle tongue.
If either click is not heard, repeat cleaning
procedure.
TOWEL DRY
DO NOT lubricate, use solvents, abrasive
cleaners, soap or other household
detergents.
Care and Maintenance
B
C
D
39