Nuna mixx next Mode D'emploi page 17

Arm Bar
Always secure the child with the harness. The arm bar
is not a restraint device.
1
- Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A "click" sound means
the arm bar is assembled completely.
2
- To remove the arm bar, press the arm bar release
buttons (1) and lift the arm bar up. (2)
3
- Fasten the inner snaps of the seat pad to the inside
of the seating area as shown.
Check Set Up
Stroller frame is latched open
Front and rear wheels securely attached
Canopy is attached to stroller frame
Arm bar is securely attached
15
MIXX next instructions