Nuna mixx next Mode D'emploi page 27

Insert
1
- To assemble the insert, place the insert over the seat
and thread the shoulder, waist and crotch harnesses
through their respective slots.
2
- Attach the hook and loop fasteners.
Reverse Seat
The seat can be used rear or forward facing.
3
- Squeeze the seat release buttons and lift the seat up.
4
- Turn the seat in the opposite direction and place on the
seat mounts until it clicks into place. A "click" sound
means the seat is attached.
Check to make sure seat is securely attached by pulling
up on it.
25
MIXX next instructions