User Manual
2
Target point of heating characteristics
The "Mode" key was used to select the "
symbol. This concerns the target point of the
heating characteristic corresponding with an
outdoor temperature of 14 °F. The value will
flash and can be changed using the plus "
–
and minus "
" keys.
Adjustment range: 68 - 194 °F.
Factory setting: 167 °F.
Base point of heating characteristics
The "Mode" key was used to select the "
symbol. This concerns the base point of the
heating characteristic corresponding with an
outdoor temperature of 68 °F. The value will
flash and can be changed using the plus "
–
and minus "
" keys.
Adjustment range: 68 - 194 °F.
Factory setting: 86 °F.
Warm weather shut down (WWSD)
The "Mode" key was used to select the
WWSD temperature "
the maximum outdoor temperature at which
the heating is still operational.
The value will flash and can be changed using
+
the plus "
" and minus "
Adjustment range: 32 - 86 °F.
Factory setting: 70 °F.
12
+
+
". This concerns
–
" keys.
AM10 - We reserve the right to make any changes due to technical modifications!
"
8163
"
Fig. 13 Display of third menu item
"
100
"
Fig. 14 Display of fourth menu item
868
Fig. 15 Display of fifth menu item
°F
°F
°F