Verathon BladderScan i10 Manuel page 10

Masquer les pouces Voir aussi pour BladderScan i10:
Table des Matières

Publicité

Procedure 3.
Follow these steps if you store the calibration tank between uses.
1. Remove the tank lid from the tank base.
2. Remove the target from the base.
3. Empty the water from the base.
4. Using a soft, clean cloth, dry the target, the base, and the lid.
CAUTION
If you empty the calibration tank and store it between uses, store it in a location that protects it
from impact and other damaging external forces.
4
0900-5104 REV-00
dISASSeMBLe THe cALIBrATIoN TANK (oPTIoNAL)

Publicité

Table des Matières
loading

Table des Matières