Before you start
Basic operation
This manual is split into two parts, one covering using the
receiver subwoofer, the other using the DVD player.
Below are some common operations and where to find
them explained in this manual.
Watching a DVD
Remember that when using the remote to control the
DVD player, you should point the remote towards the
DVD player rather than the display unit.
DVD
VOLUME
DVD
DTV
ENTER
TOP MENU
SOUND
ST
TEST
TONE
/
1
Switch on the display unit (receiver subwoofer).
2
Switch on the DVD player.
3
Switch on your TV.
Turn on your TV and make sure that it is set to the correct
video input.
4
Press DVD.
5
Press
OPEN/CLOSE on the DVD player to open
the disc tray.
RECEIVER
MUTE
PC/GAME
AUX
TUNER
SR
SURROUND
ADVANCED
CLEAR
TUNE
MENU
SETUP
ENTER
ST
RETURN
MCACC
TUNE
/
6
Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you're loading a double-
sided DVD disc, load it with the side you want to play
face-down).
7
Press
(play) to start playback.
Press to stop playback.
You can resume playback from the same
point by pressing
cancel the resume function.)
Pauses playback, or restarts playback
when paused.
Press to start scanning. Press repeatedly
to increase the scanning speed.
8
Adjust the volume.
9
Adjust the sound using the surround effects
See Listening to your system on page 22 for details.
Listening to a CD
1
Switch on the display unit (receiver subwoofer).
2
Switch on the DVD player.
3
Press DVD.
4
Load a CD and start playback.
5
Adjust the volume.
6
Adjust the sound using the surround effects
(page 22).
Listening to the radio
1
Switch on the display unit (receiver subwoofer).
2
Tune to a station (page 25) .
3
Adjust the volume.
4
Adjust the sound using the surround effects
(page 22).
. (Press
again to
04
19
En