Pioneer HTS-560DV Mode D'emploi page 12

02 Connecting up
Caution
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may result
in malfunction or fire.
Receiver subwoofer
CONTROL
SYSTEM CONNECTOR
OUT
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
AC IN
8
Note
1 • Do not use any power cord other than the one supplied with this system.
• Do not use the supplied power cord for any purpose other than connecting to this system.
12
En
ANTENNA
CONTROL IN
MCACC
SETUP MIC
FM
UNBAL 75Ω
6 5
AUDIO INPUT
DIGITAL
SPEAKERS
DVD DTV PC/GAME
SUB WOOFER R SURROUND L
(COAXIAL) (OPTICAL) (OPTICAL)
CENTER R FRONT L
To AC outlet
7 Connect the DVD player to your TV.
• Connect the VIDEO OUTPUT jack to a video input on
your TV.
Use the yellow jack of the supplied audio/video cable
for the video connection.
• Connect the AUDIO OUTPUT jacks to the
corresponding audio inputs on your TV.
Use the red and white jacks of the supplied audio/
video cable for the audio connection. Make sure you
match the left and right outputs with their
corresponding inputs for correct stereo sound.
8 Connect the power cords.
• Connect the power cords to AC inlets on the receiver
subwoofer.
Connect the power cords of the receiver subwoofer
and DVD player to a wall socket.
Surround right
(Gray)
AM
LOOP ANTENNA
ANALOG
AUX
L
R
1
Surround left
(Blue)
Listening position
Center (Green)
Front left
(White)