Electrical Connection - Atag WS90211JM Notice D'utilisation

INSTALLATION
Connection
EN 12

Electrical connection

This appliance is a Class I appliance and must be earthed.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N
GREEN/YELLOW = Earth
This canopy hood has been provided with a power plug. When
installing the hood, make sure that this plug remains accessible. We
recommend installing the wall socket out of view, behind the chimney
cover.
Attention:
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply
cable.
max 125 cm