Recharging Batteries - Topcom TwinTalker 6800 Manuel D'utilisateur

Topcom Twintalker 6800
11 Battery Charge Level/Low Battery Indication
The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the
BATTERY icon on the LCD Screen.
When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that
the batteries need to be replaced or recharged.
Do not short-circuit & dispose of in fire. Remove the batteries if this
device is not going to be used for a long period.

12 RECHARGING batteries

The PMR can be used with 4 alcaline or rechargeable NiMh AAA batteries (included).
Do not charge this unit when regular "AAA" alkaline batteries are
installed.
Only use the included AC/DC ADAPTER with "AAA" rechargeable
batteries (included). Using another adaptor will result in non-compliancy
the safety regulation and will invalidate any approval/warranty for this
product.
When using rechargeable batteries you can use the enclosed adapter (7,5V DC/200mA) to
charge.
8
All manuals and user guides at all-guides.com
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
• Insert 4 "AAA" rechargeable batteries.
• Plug the small plug of the adapter into the CHARGER
connector (4) and the other end in the electrical socket
(230V AC, 50Hz).
• Make sure that the unit is switched off in order to charge
the batteries properly.
NOTE: It takes approximately 7 to 10 hours to fully
charge the batteries.
Topcom Twintalker 6800