Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
POSITIONING
Height adjustment
The height of the appliance is adjustable from 820 to
870 mm to fine up with existing kitchen units.
Before installing the appliance between unite, adjust
the height of the feet and rear wheels. The wheels
are factory set for a height of 820 mm. To align the
appliance to a height of 870 mm, raise it by adjusting
the feet with a spanner, then remove the wheels and
refit them in the lowest position.
Fitting the side panels
•
Fit the brackets onto the panels in the positions
shown in the diagram. The dimension of 260* mm
is allowed for fitting a 100 mm plinth below the
panel. For different plinth sizes, increase the
dimension of 260* mm accordingly.
•
Rest the panels against the appliance.
•
Fit the rear brackets, taking into account the
thickness of the panels (maximum width of unit
900 mm).
•
For a correct alignment make sure that the distance
between the appliance and the cabinet is of 45 mm.
•
Secure the panels at the front.
•
Fix the squares (contained in the bag) to the
lower part of the door (references already
provided).
820
870
REAR
FRONT
EDGE
EDGE
RIGHT HAND
SIDE PANEL
15
INSIDE
820
FACE
15
280
820
870
17,5
1015
64
539
260*
45
Publicité
Table des Matières
