Bestway 58515 Manuel Du Propriétaire page 10

Control Valve function. Changing valve
positions while the pump is running can
damage the Control Valve, which may cause
personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and
rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different
filter functions: Filter, Closed, Backwash,
Rinse, Drain and Circulate.
Filter:
This function is used to filter
pool water and should be positioned
here 99% of the time. Water is
pumped through the sand filter, where
it is cleaned and returned to the pool.
A
Backwash:
to clean the sand bed; water is
pumped down through the Collector
Hub, upwards through the sand bed,
and deposited out of Port D.
A
C
C
B
This function is used
C
D
C
B
Closed:
water flowing between the sand
filter and the pool.
Rinse:
This function for initial startup,
cleaning, and sand bed leveling after
Backwash; water is pumped downwards
through the sand bed, up through the
Collector Hub and deposited out of the
valve Port D.
10
This function stops
C
A
C
B
C
A
D
C
B