Jura IMPRESSA A9 One Touch Mode D'emploi page 23

T Place another receptacle under the dual
spout.
T Touch 'Next'.
'Cleaning milk system', the dual spout and
the pipe are cleaned.
'Fresh water'
T Rinse the receptacle thoroughly, fill it with
8.5 oz (250 ml) of fresh water and immerse
the milk pipe in the water.
T Empty the other receptacle and place it
under the dual spout again.
T Touch 'Next'.
'Cleaning milk system', the dual spout and
the pipe are rinsed with fresh water.
The operation stops automatically.
system cleaning complete'
on the display.
Your IMPRESSA is once more ready for use.
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene.
9
9
'Milk
appears briefly
T Remove the milk pipe and rinse it thor-
oughly under running water.
T Press the releasing devices and pull the dual
spout down and off.
T Press the milk system down and take it out.
T Dismantle the milk system into its individual
parts.
T Rinse all the parts under running water. If
there are severely dried-on milk residues,
de
5 Maintenance
en
fr
es
pt
es
pt
ru
23