Hot Water; Daily Maintenance; Daily Operation; Switching On The Machine - Jura IMPRESSA A9 One Touch Mode D'emploi

3 Daily operation

Hot water

J
CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
T Place a cup under the hot-water spout.
T Touch ' ^ ' (bottom left) to go to the product
selector view.
T Move your finger from left to right (or vice
versa) across the touchscreen display until
'Hot water' is displayed.
T Touch 'Prepare'.
'Hot water', hot water flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
3 Daily operation

Switching on the machine

Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
T Place a receptacle under the dual spout.
18
9
9
T Press the On/Off button Q to switch the
IMPRESSA on.
'Welcome to JURA'
'Machine is heating'
'Machine is rinsing', the system rinses itself.
The operation stops automatically.
Your IMPRESSA is ready for use.

Daily maintenance

To ensure that you get many years of reliable
service out of your IMPRESSA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the
drip tray. Rinse them both with warm water.
E Always empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
T Refit the coffee grounds container and the
drip tray.
T Rinse the water tank with clean water.
T Remove the milk pipe and rinse it thor-
oughly under running water.
T Dismantle and rinse the dual spout (see
Chapter 5 'Maintenance – Dismantling and
rinsing the dual spout').
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfiber
cloth).