Ways Of Preparing A Beverage - Jura IMPRESSA A9 One Touch Mode D'emploi

Ways of preparing a beverage

The IMPRESSA offers various ways of preparing a
specialty coffee, milk foam or hot water:
U
Preparation using the start screen: Simply
touch the desired product on the display (start
screen).
The following products are displayed as
standard on the start screen:
U
'Cappuccino'
U
'Latte macchiato'
U
'Espresso'
U
'Coffee'
U
Preparation using the product selector view:
Only some of the products you can prepare
are shown on the start screen. As soon as you
touch the ' ^ ' box (bottom left), more
products are displayed in a product selector
view.
Move your fi nger from left to right (or vice
versa) across the touchscreen display until
the desired product is displayed. Then touch
'Prepare' to start preparation.
The following additional products are shown
in the product selector view:
U
'Ristretto'
U
'2 ristretti'
U
'2 espressi'
U
'2 coffees'
U
'Hot water'
U
'Milk foam'
U
'Latte macchiato doppio'
U
'Cappuccino doppio'
E The product selector view disappears
automatically after 10 seconds if no
preparation is started.
E You have the option of replacing the four
products on the start screen with your
personal favourites (see Chapter 4 'Perma-
nent settings in programming mode –
Replacing products on the start screen').
Please note that the descriptions provided in
the following sections always refer to the
default settings.
Ristretto, espresso and coffee
Example: Proceed as follows to prepare one coffee.
Precondition: The start screen is displayed.
T Place a cup under the coffee spout.
T Touch 'Coffee'.
Preparation starts. The preset amount of
water for coffee flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
2 ristretti, 2 espressi and 2 coffees
There are several ways of preparing two specialty
coffees.
U
When preparing a single product:
U
As soon as you start preparing a single
product, '2x' is displayed in the bottom right
of the display. Touch
double product.
U
Using the product selector view:
U
In the product selector view, move your
finger from left to right (or vice versa) across
the touchscreen display until the required
double product '2
'2 coffees' is displayed. Then touch 'Prepare'.
Example: Proceed as follows to prepare two
coffees (using product selector view).
Precondition: The start screen is displayed.
T Place two cups under the coffee spout.
T Touch the ' ^ ' box (bottom left).
T Move your finger from left to right (or vice
versa) across the touchscreen display until
'2 coffees' is displayed.
T Touch 'Prepare'.
Coffee preparation starts.
E Please note that when two specialty coffees
are prepared, the second is prepared
immediately after the first.
The preset amount of water for coffee flows
into the cups. Preparation stops automati-
cally. Your IMPRESSA is once more ready for
use.
2 Preparation
'2x' to prepare the
ristretti', '2 espressi' or
de
en
fr
es
pt
es
pt
ru
15