Installation And Connections - Niko 05-353 Mode D'emploi

05-353
Read the complete manual before carrying out the instal-
lation and activating the system. Keep the manual for future
reference.
1. DESCRIPTION
This 750VA wireless universal dimmer is designed for DIN-rail
mounting and is 2U wide. This universal dimmer is suitable for
dimming resistive, inductive and capacitive loads. The total connected
load can max. amount to 750VA. The dimmer functions both as a
phase control dimmer and as a reversed phase control dimmer. The
choice between both dimming principles is automatically made. The
dimmer can be used with or without memory and is provided with
an automatic detection and indication of overload.
The following 5 operating modes are possible:
- 1-push button operation with/without memory
- 2-push button operation with/without memory (works only with
a wireless control)
- calling up/programming a light atmosphere,
- OFF with 3-second operating time,
- OFF with time delay (run time). The run time can be set between
0 seconds and 3 minutes.

2. INSTALLATION AND CONNECTIONS

The dimmer is 2U wide and can be mounted in a DIN-rail enclosure.
The load (min. 60VA; max. 750VA) has to be connected to the
'load connection terminals' (see fig. 1), between terminal N and
terminal .
EN
(fig.A)
53